Cellpac CP 10A

The Cellpac CP 10A is a robust and reliable diesel generator that’s designed for vehicle compartment use. Thanks to smart air flow design and a small size, this genset is a great choice whenever diesel power has to fit in a small vehicle compartment.

  • Fits into a vehicle compartment with zero operating clearance
  • Quiet, out-of-sight, out-of-the-way, emissions compliant
  • Our most compact design
  • Easiest installation – no ducts; convenient fuel and battery connections
  • Convenient access for maintenance
  • Digital control panel
  • Performance tested before it leaves the factory

Specifications

Unit Output Rating:

  • Single-Phase, 120/240VAC, 60 Hz
  • 10.0 kW Intermittent @ 1.0 PF. Recommended maximum duty cycle of 25%, limited to 15min./hr.
  • 9.5 kW Lt. Continuous @ 1.0 PF. Recommended maximum duty cycle of 50%, limited to 30min./hr.
  • 9.0 kW Continuous @ 1.0 PF. 100% Duty Cycle

Size & Weight

  • 32.4″ L x 18.3″ W x 26.7″ H
  • 540 lbs.

Engine Sound Level:

  • 80dB(A) @ 1 Meter (3.28 Ft.)
  • 65dB(A) @ 7 Meters (27.97 Ft.)

Engine:

  • Mitsubishi, 1800 RPM, 3-Cylinder Diesel Engine
  • Liquid Cooled, 1.32 L (80.5 CID)
  • Mechanical Governing
  • Electronic Regulated, 4-Pole, Brushless AC Alternator, 1800RPM, 60 Hz.
  • Class “F” Insulation

Control System

Control Panel:

  • Digital Control System #1779

Features:

  • Convenient Error-Free Operations
  • Digital Controller with Auto-Crank and Pre-Heat
  • Starter Lockout
  • Remote Start/Stop Interface
  • Automatic Shutdowns and Warnings
  • 100 Event Log
  • J1939 CANbus Capability

Displays:

  • Oil Pressure
  • Engine Temperature
  • Hour Meter
  • Engine RPM
  • Battery Voltage

Options

  • 120V, Single-Phase in lieu of Standard
  • Kit #1780: Remote Start/Stop Panel (1)
  • Kit #1790: AC Amperage Readout Control System
  • Kit #1791: Flat Panel Face for Control System (1)
  • Kit #1801: 10 Ft. Ext. Harness for Control Panel
  • Kit #1802: 20 Ft. Ext. Harness for Control Panel
  • Kit #1429: Coolant Drain Hose
  • Kit #1241: Coolant Refill Hand Pump Kit
  • P/N #22246: 120V, 400W Block Heater
  • Weather Proofing Package for Top Mounting – POR

Downloads