Cellpac CP15E

The Cellpac CP15E by Stadco is a heavy-duty diesel generator that can be used in tight quarters, including vehicle compartments. Its small size, light weight and robust power output, in addition to smart air flow dynamics allow it to be used in zero-clearance, vehicle-mounted applications.

  • Fits into a vehicle compartment with zero operating clearance
  • Quiet, out-of-sight, out-of-the-way, emissions compliant
  • Our most compact design
  • Easiest installation – no ducts; convenient fuel and battery connections
  • Convenient access for maintenance
  • Digital control panel
  • Performance tested before it leaves the factory

Specifications

Unit Output Rating:

  • Single-Phase, 120/240VAC, 60 Hz
  • 14 kW Intermittent @ 1.0 PF. Recommended maximum duty cycle of 25%, limited to 15min./hr.
  • 13 kW Continuous @ 1.0 PF. 100% Duty Cycle

Size & Weight

  • 38.0″ L x 19.5″ W x 26.8″ H
  • 695 lbs.

Engine Sound Level:

  • 82dB(A) @ 1 Meter (3.28 Ft.)
  • 67dB(A) @ 7 Meters (27.97 Ft.)

Engine:

  • Mitsubishi, 1800 RPM, 4-Cylinder Diesel Engine
  • Liquid Cooled, 1.76 L (107.4 CID)
  • Electronic Governing
  • Electronic Regulated, 4-Pole, Brushless AC Alternator, 1800RPM, 60 Hz.
  • Class “F” Insulation

Control System

Control Panel:

  • Digital Control System #1779

Features:

  • Convenient Error-Free Operations
  • Digital Controller with Auto-Crank and Pre-Heat
  • Starter Lockout
  • Remote Start/Stop Interface
  • Automatic Shutdowns and Warnings
  • 100 Event Log
  • J1939 CANbus Capability

Displays:

  • Oil Pressure
  • Engine Temperature
  • Hour Meter
  • Engine RPM
  • Battery Voltage

Options

  • 120V, Single-Phase in lieu of Standard
  • Kit #1780: Remote Start/Stop Panel (1)
  • Kit #1790: AC Amperage Readout Control System
  • Kit #1791: Flat Panel Face for Control System (1)
  • Kit #1801: 10 Ft. Ext. Harness for Control Panel
  • Kit #1802: 20 Ft. Ext. Harness for Control Panel
  • Kit #1429: Coolant Drain Hose
  • Kit #1241: Coolant Refill Hand Pump Kit
  • P/N #22246: 120V, 400W Block Heater
  • Weather Proofing Package for Top Mounting – POR

Downloads